TiO2 A100 is anatase‑type titanium dioxide optimized for papermaking and paper coating. With controlled particle‑size distribution, it features outstanding whiteness, fine hiding power and favorable dispersibility in aqueous slurry system. When added in wet‑end papermaking or coating formula, it significantly improves paper brightness, opacity and printability, reduces show‑through defect. It has good compatibility with paper fiber, coating adhesive, retention aid and other papermaking auxiliari

Product Detail

Product Overview

TiO2 A100 CAS 13463‑67‑7 is sulfate‑process anatase titanium dioxide dedicated to paper making and paper coating. Optimized particle size matches requirements of paper filler and coating color. This grade solves common papermaking pain points: insufficient paper whiteness, poor opacity, low pigment retention and uneven coating surface. It adapts to wet‑end feeding and paper coating preparation process for mass paper production.

Key Features

High whiteness and superior opacity, greatly enhance paper brightness and reduce print‑through show‑through phenomenon.
Good dispersibility in water, easy to prepare stable TiO₂ slurry for papermaking wet‑end or coating tank.
Satisfactory retention rate in pulp, lower pigment loss and comprehensive production cost.
Improve paper surface smoothness and ink‑absorbing property, upgrade final printing performance.
Good compatibility with plant fiber, latex binder, retention aid and other papermaking additives.
Stable chemical inertness, no adverse impact on paper forming, drying and post‑processing performance.

Main Applications

‑ Filler for cultural printing paper

‑ Paper coating pigment for coated paper

‑ Writing & copying base paper

‑ General decorative base paper

‑ Other paper and paper‑coating products requiring high whiteness and opacity

Usage Recommendation

‑ Recommended dosage: 2‑10 wt% based on dry pulp weight for wet‑end filling; 5‑18 wt% in coating formula, adjust according to whiteness and opacity target.

‑ Pre‑disperse titanium dioxide into uniform aqueous slurry before adding to pulp chest or coating tank.

‑ Appropriately use retention aid system to raise pigment retention for wet‑end addition.

‑ Keep pulp and coating slurry pH within normal papermaking range.

‑ Conduct small‑scale papermaking or coating trial test before mass manufacturing.

Storage & Packaging

‑ Packaging: 25kg moisture‑proof kraft paper bag with PE inner liner.

‑ Storage: Store in dry, cool and ventilated warehouse, keep tightly sealed against moisture absorption and caking.

‑ Shelf life: 24 months under standard storage conditions.

Previous : Anatase Titanium Dioxide A100 CAS 13463-67-7 General Purpose for Interior Paint Next : Anatase TiO2 A101 CAS 13463-67-7 for Rubber and Plastic Filler

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

TiO2 A100 CAS 13463-67-7 High Whiteness for Paper Making and Paper Coating

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.