MQ Silicone Resin for Weatherable Coating CAS 67763‑19‑3 is M‑Q structured methyl silicone resin synthesized by co‑hydrolysis and polycondensation of methyl silane and tetrafunctional silicate monomers. The M/Q molar ratio is precisely controlled during production. Thanks to stable siloxane backbone, the resin delivers outstanding ultraviolet‑resistance and thermal‑oxidative stability. It is applied in exterior paint and protective coating formulations to improve outdoor weathering property, sur

Product Detail

MQ Silicone Resin for Weatherable Coating CAS 67763‑19‑3, UV‑Resistant Heat‑Stable MQ Resin for Exterior Paint & Protective Coating

This weathering‑grade MQ silicone resin is manufactured through controlled co‑hydrolysis and polycondensation of methyl alkoxysilane and tetraalkoxysilane precursors. Its molecular structure consists of monofunctional M‑units and tetrafunctional Q‑units that construct compact three‑dimensional siloxane macromolecules. The M/Q molar ratio is carefully tuned to strike a balance between film‑forming hardness, flexibility and solubility in coating‑grade hydrocarbon solvents. The fully methyl‑substituted siloxane skeleton avoids light‑sensitive aromatic groups, which provides fundamental guarantee for excellent UV‑resistant performance.

Unlike linear silicone polymers, the densely cross‑linked M‑Q molecular architecture elevates thermal‑oxidative stability. Under long‑term outdoor exposure including strong solar ultraviolet radiation, rain erosion and alternating hot‑cold cycles, the siloxane bonds resist photochemical cleavage and slow down coating degradation. When blended into exterior paint and protective coating systems, the resin can act either as primary film‑former or as high‑performance modifying additive for organic‑silicone hybrid coatings.

For pure silicone exterior protective coatings, this MQ resin builds a continuous rigid silicone film after solvent evaporation and thermal curing. It improves surface hardness, scratch resistance and water‑repellent performance of the finished coating layer, reducing water penetration into metal or mineral substrates and mitigating substrate corrosion.

In hybrid organic‑silicone exterior paint formulas, the MQ silicone resin is combined with acrylic, polyester or epoxy resin. It introduces stable siloxane segments into the cured coating network, effectively restraining chalking, yellowing and powdering defects caused by long‑term outdoor weathering. The service life of exterior paint on building facades, metal structural components and equipment surfaces can be significantly extended.

The resin shows good solubility in aromatic solvents and high‑boiling aliphatic hydrocarbon solvents. Proper curing temperature and baking schedule should be defined according to specific coating formulations. Insufficient curing will lead to soft coating films with poor water resistance; excessive high‑temperature baking may trigger partial thermal decomposition of the siloxane framework.

During coating compounding, sufficient stirring is required to achieve complete dissolution of MQ silicone resin before mixing with pigments, fillers and other coating additives. Poor dissolution will produce micro‑resin agglomerates, resulting in grainy surface texture and localized weak spots on the cured coating film. The resin dosage must be optimized: excessive MQ resin loading increases coating brittleness and raises risk of surface cracking; insufficient addition cannot deliver expected weather‑resistant improvement.

The product shall be stored hermetically under cool and dry conditions. Avoid prolonged exposure to humid air to prevent slow moisture‑triggered structural changes. During material handling, cross‑contamination with functional silicone resins containing vinyl, hydrogen or silanol groups must be avoided, to prevent unpredictable side‑reactions inside coating formulations. This UV‑resistant heat‑stable MQ silicone resin is a dedicated film‑forming and modifying raw material for exterior paint and industrial weather‑resistant protective coatings.

Previous : MQ Silicone Resin for Release Agent CAS 67763-19-3, Low-Surface-Energy MQ Resin for Mold Release & Anti-Fouling Coating Next : Solid MQ Silicone Resin Powder / Flake CAS 67763-19-3, Easy-Handling Solid MQ Resin for Plastics Masterbatch & Coating

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

MQ Silicone Resin for Weatherable Coating CAS 67763-19-3, UV-Resistant Heat-Stable MQ Resin for Exterior Paint & Protective Coating

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.