This cationic external antistatic agent is a surface‑treatment type antistatic product instead of internal compounding additive. It provides fast‑acting static dissipation once applied onto substrate surfaces. It is suitable for post‑treatment of fluorocarbon coating surfaces, PVC, PE, BOPET films and electronic‑packaging materials. After spraying, dipping or roll‑coating application and subsequent drying, a thin conductive cationic layer is formed on the material surface to release accumulated

Product Detail

Product DetailsThis cationic external antistatic agent consists of cationic active surfactant components dissolved in suitable solvent or aqueous carrier. It is dedicated to offline or inline surface treatment, and it is not designed for melt compounding inside polymer resin. After being transferred onto the substrate surface via roll‑coater, spray nozzle or dipping bath, the carrier medium evaporates during drying, leaving oriented cationic molecular layer on top of fluorocarbon coating, PVC, PE and BOPET film surfaces. The hydrophilic ionic segment absorbs trace ambient moisture to construct a transient conductive surface layer for rapid static dissipation.

Fast‑acting performance is its core characteristic. Immediately after drying, the treated surface obtains antistatic property without waiting for slow molecular migration from bulk polymer, which perfectly matches high‑speed film converting and electronic‑packaging production workflows. Nevertheless, the antistatic effect originates purely from the surface‑deposited film. Friction, wiping and solvent contact will gradually remove the conductive layer, so the service life of antistatic functionality is limited compared with internally compounded permanent antistatic additives.

Special compatibility precautions should be observed. This cationic agent cannot be mixed with anionic processing fluids, cleaning agents or coating materials; direct blending will induce flocculation and sediment. When treating fluorocarbon coating surfaces, pre‑test is necessary to check whether the antistatic treatment solution attacks the existing cured coating film and causes gloss reduction or surface spotting. For BOPET and electronic‑packaging films, excessive coating weight may lead to film blocking during rewinding.

Recommended working concentration ranges from 1.5 %‑10.0 % after dilution with corresponding diluent. Application methods include roll coating, spray treatment and short‑time dipping. Pre‑treatment lab evaluation is mandatory, covering surface resistivity after drying, blocking tendency of rolled film, surface gloss, coating resistance and ageing performance before formal mass processing.

Store the product in hermetically sealed containers inside cool, dry and ventilated warehouse. Keep away from direct sunlight and excessive heat. Avoid contamination by anionic raw materials. Reseal containers immediately after partial discharge to maintain stable solution properties.

Previous : Sodium Secondary Alkane Sulfonate Antistatic Agent Liquid CAS 68037-49-0, Internal/External for PVC PS ABS PET PMMA TPU Polyolefin Next : Quaternary Ammonium Antistatic Agent for Textile Fiber & Water-Based Coatings/Ink, Cationic with Antistatic & Emulsifying Dual Effect

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

Cationic External Antistatic Agent for Fluorocarbon Coating PVC PE BOPET Film & Electronic Packaging, Fast-Acting Surface Treatment

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.