Zirconium Carboxylate 18% Zr CAS 22464-99-9 for High Solids Highly Filled Alkyd
Zirconium Carboxylate 18% Zr CAS 22464‑99‑9 is high‑content lead‑free zirconium‑based auxiliary drier with 18% zirconium metal content. It is optimized for high‑solids and highly filled alkyd coatings with heavy pigment and filler loadings. Working together with cobalt and manganese driers, it effectively promotes through‑curing, enhances film hardness and water resistance, and avoids curing defects caused by large amounts of fillers. Low addition dosage brings less solvent interference, well‑su
Product Overview
Zirconium Carboxylate 18% Zr CAS 22464‑99‑9 is high‑concentration zirconium carboxylate lead‑free auxiliary through drier. It cannot serve as surface drier independently and must be compounded with cobalt‑manganese drier combinations. For high‑solids and highly filled alkyd formulas containing large‑volume pigments and mineral fillers, it solves insufficient inner‑film curing problems easily occurred in heavy‑loaded systems. It improves cross‑linking density, upgrades hardness, gloss and water resistance of finished films. Its high metal content reduces required addition amount, minimizes solvent introduction, fits low‑VOC high‑solids formulation design, and maintains stable performance in storage and industrial production.
Key Features
‑ 18% ultra‑high zirconium content, low effective addition dosage ‑ Lead‑free environmental‑friendly formulation for industrial coating compliance ‑ Specially optimized for high‑solids and highly filled alkyd coating systems ‑ Excellent tolerance to high‑content pigments and mineral fillers ‑ Strong synergistic effect with cobalt and manganese composite driers ‑ Remarkably improves through‑curing, film hardness and water‑resistant performance ‑ Reduces solvent input for high‑solids formula requirement ‑ Consistent batch‑to‑batch quality for large‑volume industrial coating production
Technical Specifications
‑ Product Name: Zirconium Carboxylate ‑ Zirconium Content: 18% Zr ‑ CAS No.: 22464‑99‑9 ‑ Appearance: Pale yellow viscous transparent liquid ‑ Solubility: Soluble in aliphatic, aromatic solvents and high‑solids alkyd resins ‑ Density: 1.02‑1.12 g/cm³ @25℃ ‑ Viscosity: Medium‑viscosity liquid ‑ Flash Point: ≥60℃ ‑ Moisture: ≤0.2%
Application Scenarios
‑ High‑solids alkyd industrial coatings ‑ Highly filled alkyd coatings with heavy pigment and filler loading ‑ Heavy‑duty protective industrial alkyd paint ‑ Solvent‑reduced lead‑free anti‑rust coatings ‑ Composite drier system matched with cobalt and manganese driers
Usage Recommendation
‑ Typical dosage: 0.06%‑0.30% calculated on total paint weight (as metal zirconium) ‑ Premix sufficiently with cobalt, manganese and other drier additives before adding into coating formula ‑ Do not add during high‑temperature resin synthesis procedure ‑ Standalone application is invalid, cobalt‑manganese drier combination is required ‑ Conduct compatibility test for formulas with high filler content ‑ Adjust dosage according to drying test, hardness and gloss evaluation ‑ Complete full laboratory assessment before mass‑scale production
Package & Storage
‑ Standard package: 25kg / 200kg metal drum ‑ Store in cool, dry and well‑ventilated warehouse, keep away from heat source and open flame ‑ Tightly seal container after opening to prevent solvent volatilization and performance deterioration ‑ Shelf life: 12 months under proper storage conditions
Safety Notes
‑ Combustible liquid, keep away from all ignition sources. ‑ Avoid skin contact and eye splash. Wear chemical‑resistant gloves and safety goggles during handling. ‑ Avoid inhalation of vapor and mist, ensure effective local ventilation. ‑ Refer to SDS for full guidance on handling, transportation and emergency disposal.
Previous : Zirconium Octoate 12% Zr CAS 22464-99-9 Through Drier for High Film Build Industrial Alkyd
Next : High‑Content Zirconium Octoate 24% Zr CAS 22464-99-9 Low‑Dosage Drier for Thick Film Alkyd
Copy product links
Long by picture save/share
Add Successfully
Add Successfully
Jishengya Technology
Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.
点击右上角
分享给朋友吧
Copyright © 2005-2026 Shenzhen Jishengya Technology Co., Ltd. All Rights Reserved.
