Surface Anti-Static Dust-Proof Agent Nonionic Surfactant Blend, for Plastic Housing & Film Reduce Static Dust Adsorption Keep Clean
This surface anti‑static dust‑proof agent is a compounded nonionic surfactant blend developed as internal antistatic additive for plastic housings and plastic films. After injection molding, extrusion or blown‑film processing, the active ingredients slowly migrate toward the finished plastic surface. A thin continuous hydrophilic conductive layer is established to dissipate static electricity. It effectively reduces static‑driven dust adsorption, keeping plastic housing and film surfaces clean d
Product DetailsThis nonionic surfactant blend is composed of multiple amphiphilic non‑ionic surfactant components with different hydrophilic‑lipophilic balances. It can be directly premixed with resin pellets during compounding, or manufactured into concentrated antistatic masterbatch before injection molding, sheet extrusion and blown‑film operations.
Once the molten plastic cools and solidifies after forming, the surfactant molecules gradually diffuse outwards to the material surface. Hydrophilic molecular segments orient toward the exterior and absorb trace ambient moisture, constructing a thin hydrophilic conductive skin on the plastic surface. This conductive skin dissipates accumulated static charges rapidly. Consequently, electrostatic attraction towards airborne fine dust particles is suppressed, which helps plastic housings and films retain cleaner surfaces over storage and service periods.
As a migratory non‑ionic antistatic additive, its static‑dissipating performance is humidity‑dependent. Antistatic efficiency will drop under extremely low‑humidity workshop or service environments. Excessive dosage accelerates surface migration, resulting in surface blooming, slippery plastic surfaces. For rolled films, over‑dosage may induce reel blocking; for plastic housings, blooming may interfere with subsequent painting, printing and adhesive bonding operations. Insufficient loading cannot deliver satisfactory dust‑proof and antistatic results.
Thermal stability needs careful attention during high‑temperature plastic processing. Overheating inside the extruder or injection barrel will cause partial thermal decomposition of surfactant fractions, releasing volatile fumes and weakening final antistatic and dust‑proof performance.
The typical recommended dosage ranges from 0.4 wt%‑1.6 wt% based on total resin weight. Pre‑production laboratory testing must evaluate mixing uniformity, thermal stability during processing, migration speed, surface resistivity, anti‑blocking property of rolled film, and surface treatment compatibility including printing and painting adhesion for plastic housings.
Store the surface anti‑static dust‑proof agent in sealed moisture‑proof bags within a cool, dry and ventilated warehouse. Avoid prolonged high‑temperature storage to prevent caking. Prevent direct sunlight exposure. Reseal packaging immediately after opening to preserve stable physical condition and consistent processing performance.
Previous : Antistatic Matting Agent Silica Matting Powder Blend, Dual Matting & Anti-Static Dust-Proof for Matte Coating & Leather Finish
Next : BOPP Film Antistatic Modifier Saturated Alkyl Bis(Hydroxyethyl)Amine, Low Bloom No Impact on Printing & Lamination High Heat Stability
Copy product links
Long by picture save/share
Add Successfully
Surface Anti-Static Dust-Proof Agent Nonionic Surfactant Blend, for Plastic Housing & Film Reduce Static Dust Adsorption Keep Clean
Add Successfully
Jishengya Technology
Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.
点击右上角
分享给朋友吧
Copyright © 2005-2026 Shenzhen Jishengya Technology Co., Ltd. All Rights Reserved.
