Methoxy MQ Silicone Resin CAS 67763‑19‑3 is a reactive alkoxy‑containing M‑Q structured silicone resin manufactured by co‑hydrolysis and partial polycondensation of methoxy‑substituted silane, methyl silane and tetrafunctional silicate monomers. Retained methoxy groups enable moisture‑triggered hydrolysis followed by condensation cross‑linking. It is used as modifying and film‑forming resin for condensation‑cure silicone coating and silicone sealant to enhance film hardness, adhesion and weather

Product Detail

Methoxy MQ Silicone Resin CAS 67763‑19‑3, Reactive Methoxy‑Functional MQ Resin for Condensation‑Cure Coating & Sealant

This methoxy‑functional MQ silicone resin is synthesized through controlled co‑hydrolysis and incomplete polycondensation of methylalkoxysilane and tetraalkoxysilane raw materials. The molecular structure consists of monofunctional M‑units and tetrafunctional Q‑units. Reactive methoxy groups are anchored onto the three‑dimensional siloxane skeleton. The content of residual methoxy groups can be precisely adjusted during synthetic procedures to satisfy different curing‑speed and cross‑link‑density requirements for coatings and sealants.

Unlike silanol‑type hydroxy MQ resin, the methoxy‑functional groups have relatively low inherent reactivity. After contact with ambient moisture, methoxy groups first undergo hydrolysis to generate silanol groups, and subsequent dehydration‑condensation reactions take place. This resin can self‑condense, or react with silanol‑terminated linear silicone polymers to build integrated three‑dimensional silicone networks. Organotin, titanate or zirconate compounds are commonly adopted as condensation catalysts to accelerate the overall curing process.

For condensation‑cure silicone coating applications, the methoxy MQ resin serves as an essential film‑forming component. It increases cured coating hardness, scratch resistance and outdoor UV‑weathering performance. It improves adhesion on metal, glass and concrete substrates, reducing coating peeling after long‑term outdoor exposure.

In one‑component moisture‑curing silicone sealant formulations, this reactive MQ resin enhances cohesive strength, high‑temperature resistance and modulus of cured sealant. It optimizes interfacial bonding between sealant and substrate surfaces, while maintaining suitable elastic deformation capacity under thermal expansion‑contraction stress.

The resin exhibits favorable solubility in aromatic hydrocarbons, aliphatic solvents and medium‑viscosity silicone fluids. Humidity level significantly influences curing velocity. Low‑humidity environments slow down hydrolysis‑condensation and lead to incomplete deep curing; excessive humidity may cause rapid surface skinning and trap residual solvent underneath the coating or sealant surface, resulting in blister defects. Catalyst dosage requires careful calibration: excessive catalyst shortens pot‑life for two‑component systems, while insufficient catalyst leads to poor cross‑linking and inferior mechanical properties.

During formulation processing, homogeneous dissolution of methoxy MQ resin inside silicone polymer base should be completed prior to catalyst addition. For one‑component sealant production, strict low‑humidity conditions are mandatory throughout compounding and packaging. Premature exposure to moist air will trigger partial hydrolysis of methoxy groups, inducing pre‑cross‑linking, viscosity rise and gel particles inside finished products.

The product must be hermetically sealed and stored under cool, dry, low‑humidity conditions. Avoid accidental ingress of moisture during material handling. Cross‑contamination with silanol‑rich raw materials should be prevented, otherwise undesired pre‑condensation will occur during storage. This methoxy‑functional MQ silicone resin acts as key reactive modifying raw material for moisture‑triggered condensation‑cure silicone coatings and silicone sealants.

Previous : Methyl-Phenyl MQ Silicone Resin CAS 67763-19-3, Weatherable MQ Resin for Outdoor Coating Silicone Rubber & Adhesive Next : Epoxy MQ Silicone Resin CAS 67763-19-3, Epoxy-Functional MQ Resin for Adhesion Promotion & Polymer Modification

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

Methoxy MQ Silicone Resin CAS 67763-19-3, Reactive Methoxy-Functional MQ Resin for Condensation-Cure Coating & Sealant

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.