Bio‑Based Wax Dispersion is a renewable aqueous wax dispersion developed as direct alternative to LUBA‑print WX 9825. Featuring high 85‑95% biocarbon content derived from sustainable raw materials, this ready‑to‑use liquid wax additive offers excellent slip, anti‑blocking and rub‑resistant properties. It can be simply incorporated into waterborne coatings and water‑based printing inks without extra grinding, supporting the development of low‑carbon and eco‑friendly industrial formulations.

Product Detail

Product Overview Bio‑Based Wax Dispersion (85‑95% Biocarbon) is a sustainable aqueous wax dispersion formulated to replace LUBA‑print WX 9825. The wax fraction originates from renewable biological feedstock. Fine wax particles are stably dispersed in an aqueous carrier phase. After film formation, wax components migrate gently to the coating or ink surface to build a uniform lubricating layer. It reduces surface friction coefficient, enhances rub‑resistance and anti‑blocking performance while complying with increasing market demand for bio‑based, low‑carbon raw materials.

Key Features ‑ High biocarbon content 85‑95%, supports eco‑friendly and low‑carbon product formulation ‑ Ready‑to‑use liquid dispersion, no additional grinding required for processing ‑ Effective improvement on surface slip, abrasion‑resistance and anti‑blocking property ‑ Good compatibility with various water‑borne resin binders for coating and ink ‑ Reliable drop‑in equivalent for LUBA‑print WX 9825 to simplify raw‑material switching

Typical Technical Properties ‑ Chemical Type: Bio‑based aqueous wax dispersion ‑ Biocarbon Content: 85‑95% ‑ Appearance: Milky liquid dispersion ‑ Solid Content: Refer to TDS ‑ pH Value: Refer to TDS ‑ Average Particle Size: Refer to TDS

Applications ‑ Water‑borne industrial coatings: Improve surface slip and scuff resistance for wood and plastic water‑based topcoats ‑ Water‑based printing ink: Boost rub‑resistance for flexographic and gravure packaging inks ‑ Water‑based overprint varnish: Reduce blocking tendency for stacked printed packaging ‑ Eco‑friendly water‑borne finishing system for paper and board

Processing Recommendation Add this bio‑based wax dispersion under moderate stirring at the later dilution or let‑down stage of coating and ink manufacturing. Recommended dosage ranges from 0.4‑3.2 wt% based on total formulation weight. It is strongly advised to run laboratory formulation trials prior to formal mass production. High‑shear intensive grinding should be avoided to prevent particle damage.

Storage & Handling Store in sealed original containers at 5‑35℃ inside ventilated warehouse. Protect from freezing and direct strong sunlight. Avoid prolonged high‑temperature storage. Gently agitate before use if slight sediment appears. Follow standard safety practices for handling industrial aqueous chemical dispersions.

Previous : PTFE-Modified Polyolefin Micronized Wax CAS 9002-84-0 Abrasion Resistant Slip Additive Coating Ink (CERETAN MXS 3615 B Equivalent)

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

Bio-Based Wax Dispersion 85-95% Biocarbon Waterborne Coating Ink Slip Additive (LUBA-print WX 9825 Equivalent)

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.