High strength hard ABS‑Like UV Resin, 405nm wavelength photopolymer resin compatible with SLA and LCD 3D printers. Delivers rigid printing performance, sharp detail reproduction and stable mechanical property,

Product Detail

Product Overview

Our ABS‑Like UV Resin is a 405nm wavelength photopolymer specially developed for SLA and LCD resin 3D printers. Formulated to simulate the mechanical performance of ABS plastic, it balances high hardness and structural rigidity for printed objects. The resin presents stable liquid state with low sedimentation, brings smooth printing experience for desktop resin printing equipment.

Key Features

405nm UV curing wavelength, widely compatible with mainstream LCD and SLA 3D printers
ABS‑like high‑hardness rigid performance, excellent structural support after full curing
Outstanding detail resolution, fine texture and sharp edge reproduction
Good inter‑layer bonding strength, reduce layer separation risk
Low shrinkage rate during curing, keep dimensional accuracy of finished prints
Smooth surface finish after post‑curing, less post‑polishing workload

Application Scenarios

Hard functional prototypes for product verification
Rigid structural test samples
Mechanical simulation parts
High‑precision hard decorative models
Engineering concept prototype development

Printing Recommendation

Wavelength: 405 nm
Exposure parameters shall be adjusted according to different printer models and layer thickness
Shake and stir resin fully before each printing job to avoid component settlement
Keep printing environment temperature between 22‑28℃ for stable printing result
After printing, clean printed parts with isopropyl alcohol, then perform UV post‑curing to achieve maximum hardness performance

Storage & Package

Store in cool, dry and dark sealed condition, avoid direct sunlight and UV light source
Keep away from high‑temperature environment
Seal tightly after opening to prevent resin premature curing
Standard package: 1kg plastic bottle

Notes

Avoid direct skin and eye contact with raw liquid resin. Wear gloves and eye protection during operation. Dispose waste resin following local chemical waste regulations. Do not pour leftover liquid resin into sewer.

Previous : ASA 3D Printer Filament 1.75mm 1kg Weatherproof for Garden and Automotive Next : High Toughness ABS‑Like Photopolymer Resin For LCD SLA 3D Printer Gray Black White Clear Transparent Green

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

ABS‑Like UV Resin 3D Printing Resin High Strength Hard 405nm Photopolymer Resin

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.